A.G. Russell Knives
There are 0 items in your cart totaling $0.00
Production - Knife Collector's Club Knives
Other A. G. Russell™ Knives
Knife Collectors Club™ Pocket Barlow - 1986
The CM-11 was produced in the mid-1980s in Japan, with an AUS-8 blade at 57-59 Rc., ground extremely thin for the very finest slicing capability.
CM-11P Etched/Engraved $185.00
CM-11E Etched $85.00
20th Century Barlow Lockback
In 1984, an opportunity presented itself to work with one of the best manufacturers of traditional folders in Seki, Japan. The CM-10 was the first of many folders produced for us by this fine Japanese maker. We have a VERY small quantity of the Collector Grade (serial numbers 301-1000), the Excelsior Grade (serial #26-300) with etched blade and with etched blade and engraved bolsters and the Premier Grade (serial numbers 1-25) with etched blade and special engraved bolsters.
CM-10P 1-25 $495.00
CM-10EE 26-300 etch & engr $225.00
CM-10E 26-300 etched $165.00
CM-10A 301-1000 $135.00
CM-16 Premier Cattaraugus Muskrat
These knives are made using ATS-34, the steel that is used by most of today's top Custom Knifemakers. This steel is not used often in production knives for several reasons, the most important of which is cost. This steel cost several times as much as 440A or 8A and is more than twice the cost of 440C.
CM-16P $325.00
A.G. Russell™ Hen & Rooster KCC CM-7 .45 Long Colt
In 1979, Hen & Rooster and A. G. Russell produced the CM-7, the .45 Long Colt which was the first knife designed entirely by me for Hen & Rooster to make. This Vest Pocket Skinner commemorates the American West and the Colt Single Action.
CM-7A #301-1,000 $185.00
CM-7B # over 1,000 $165.00
Cattaraugus Liberty Knife Copper over Brass
Made by the Knife Collectors Club in 1976 to commemorate the 100th anniversary of the Statue of Liberty. The handles are sculpted of solid brass.
US-1A Copper over Brass $44.95
US-1B Brass $34.95
RF125 RustFree $7.95
CM-3 Luger Pistol
In 1973, I took the Knife Collector's Club knife production to Germany. For the CM-3, The Luger Pistol, I dealt with the Baron whose family had owned the Puma Cutlery Company for over 100 years
CM-3A $175.00
Cattaraugus® KCC FH-3 Two Blade Trapper 1990
This 1990 Knife Collectors Club offering, is a unique knife in several ways. Probably the most unusual thing about it is the way the large blade unlocks. In 1988 or 1989, I was shown an old knife which made use of this locking system and I was immediately intrigued. There are very few two bladed knives with a locking blade.
FH-3A 301-1000 $125.00
FH-3B over 1001 $99.00
Knife Collectors Club™ 35th Anniversary Knife
To commemorate the 35th Anniversary of the founding of the Knife Collectors Club™, A.G. has designed the Cattaraugus® Two Blade Whittler. While this is a Reverse Congress pattern, notice that it is like no other Reverse Congress you have seen.
AN-1P 1-25 $1,295.00
AN-1A 101-500 $175.00